CS240/CS231 6-27Troubleshooting 62 ReminderIf the paper is misfed as described below, contact your technical representative.The paper is wrapped around the timing roller.The paper is folded or shredded by the timing roller.The paper is wrapped around the roller in the fusing unit.The paper is folded or shredded by the roller in the fusing unit.The paper that was removed tore and remains in the fusing unit.Decreased image quality may result if the surface of the image transfer belt or image transfer roller istouched. Be careful not to touch the surface of the image transfer belt or the image transfer roller.Be careful not to touch the film and surface of the paper take-up roller with your hands.Clearing a paper misfeed in the automatic duplex unit!DetailFor details on the positions of paper misfeeds, refer to "Paper misfeed indications" on page 6-6.1 Open the door of the automatic duplex unit.2 Slowly remove any misfed paper from the automatic duplexunit.Image transfer beltImage transfer roller
