13 Utility mode13-42 CS240/CS2318 Check that the distance from the starting print position of thetest pattern to the edge of the paper (b) is 3 mm (±0.5 mm).– If the distance is 2.4 mm or less, touch [+] to increase theadjustment (between 0.2 mm and 3.0 mm).– If the distance is 3.6 mm or more, touch [-] to reduce theadjustment (between -0.2 mm and -3.0 mm).– If the distance is between 2.5 and 3.5 mm, continue withstep 10.– Each time [+] or [-] is touched, the value is increased ordecreased by one increment.9 Press the [Start] key.The adjusted test pattern is printed.10 Adjust the distance from the starting print position of the test pattern to the edge of the paper.– Check that the distance has been adjusted to between 2.5 and 3.5 mm.– If more adjustment is necessary, repeat steps 8 and 9.– To adjust the print position for a different paper tray, return to step 6.11 Touch [OK].– To cancel the setting and select the default, press the [Reset] key.The print position is adjusted.Leading edge adjustment (Duplex side 2)The starting print position at the leading edge for the second side during automatic double-sided copyingwith each type of paper (with respect to the paper feed direction) can be adjusted.0 The starting print position is adjusted during manufacturing of the machine. Normally, the starting printposition will not need to be adjusted.1 Display the Administrator Settings screen.– For details on displaying the Administrator Settings screen, refer to "Displaying the administratorsettings screen" on page 13-35.2 Touch [1 System Settings].The System Settings screen appears.3 Touch [7 Expert Adjustment].The Expert Adjustment screen appears.4 Touch [2 Printer Adjustment].The Printer Adjustment screen appears.5 Touch [3 Leading Edge Adjustment (Duplex Side 2)].The Leading Edge Adjustment (Duplex Side 2) screen appears.bb: 3.0 mm ± 0.5 mm
