Control panel setup1196Restoring the network settings to factory default 6If you wish to reset the print server back to its default factory settings (resetting all information such as thepassword and IP address information), please follow these steps:NoteThis function restores all wired and wireless network settings to the factory default.a Press Menu.b Press a or b to choose Network.Press OK.c Press a or b to choose Network Reset.Press OK.d Press 1 to choose Reset.e Press 1 to choose Yes for reboot.f The machine will re-start. You can now reconnect the network cable and configure the network settingsto work with your network.Printing the Network Configuration List 6NoteNode name: Node name appears on the Network Configuration List. The default node name is“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” isyour machine’s MAC Address / Ethernet Address.)The Network Configuration List prints a report listing all the current network configuration including thenetwork print server settings.a Press Menu.b Press a or b to choose Print Reports.Press OK.c Press a or b to choose Network Config.Press OK.d Press Start.NoteIf the IP Address on the Network Configuration List shows 0.0.0.0, wait for one minute and try again.
