Wireless configuration for Macintosh using the Océ installer application6453 Encryption key, WEP key, Passphrase. For LEAP and EAP-FAST, record the Name and Password.For example: 5• If you have previously configured the wireless settings of the machine, you must reset the network LANsettings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset,press 1 for Reset and then choose 1 for Yes to accept the change. The machine will restart automatically.• If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Onceyou are sure that you can print, configure the software settings following the instructions.• You need to temporarily use an Ethernet cable during configuration. (The Ethernet cable is not a standardaccessory.)For example:64-bit ASCII: Uses 5 text characters e.g. “Hello” (this is case sensitive)64-bit Hexadecimal: Uses 10 digits of hexadecimal data e.g. “71f2234aba”128-bit ASCII: Uses 13 text characters e.g.“Wirelesscomms” (this is case sensitive)128-bit Hexadecimal: Uses 26 digits of hexadecimal datae.g.“71f2234ab56cd709e5412aa3ba”Network name:(SSID, ESSID)HELLOCommunication Mode Authentication method Encryption mode Network keyInfrastructure Pre-Shared Key (WPA2-PSK) AES 12345678
