Configuring your machine for a wireless network273Configuration using the Océ installer application on the CD-ROM to configureyour wireless network machine 3You can also use the Océ installer application on the CD-ROM we have provided with the machine. You willbe guided by the on-screen instructions until you are able to use your machine. You must know your wirelessnetwork settings before you proceed with this installation. (See Using the Océ installer application on theCD-ROM to configure your machine for a wireless network on page 35.)Configuration temporarily using a network cable 3If there is an Ethernet Hub or Router in the same network as the wireless access point (A) of your machine,you can temporarily connect the Hub or Router to the machine using an Ethernet cable (B), this is an easyway to configure your machine. You can then remotely configure the machine from a computer on thenetwork.BA
