Wireless configuration for Windows ® using the Océ installer application514Configuration in Ad-hoc mode 4Before configuring the wireless settings 4IMPORTANT• The following instructions will install your machine in a network environment using the Océ installerapplication for Windows® found on the CD-ROM we have provided with the machine.• You can also setup your machine using the machine’s control panel which we recommended. SeeConfiguring your machine for a wireless network on page 19.• If you have previously configured the wireless settings of the machine, you must reset the network LANsettings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset,press 1 for Reset and then choose 1 for Yes to accept the change. The machine will restart automatically.• If you are using Windows® Firewall or a firewall function of anti-spyware or antivirus applications,temporarily disable them. Once you are sure that you can print, configure the software settings followingthe instructions.Configure the wireless settings 4a Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch.b Press Menu, 7, 2, 7. Using a or b, choose On and press OK.72.WLAN7.WLAN Enablea Onb OffSelect ab or OKc Turn on your computer.Close any applications running before configuration.d Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.Choose your language.
