Wireless configuration for Windows ® using the Océ installer application594n If your network is not configured for Authentication and Encryption, the following screen will appear. Tocontinue configuration, click OK and go to step p.o If your network is configured for Authentication and Encryption, the following screen will appear. Whenconfiguring your machine, you must configure your machine to match the Authentication andEncryption settings you wrote down on page 54 for your existing wireless network. Choose theAuthentication Method and Encryption Mode from the pull-down list in each setting box. Then enterthe Network Key and Confirm Network Key, and then click Next.Note• If you want to setup or configure additional WEP key indexes other than WEP key1, click Advanced.• If you do not know the Authentication or Encryption settings for your network, contact your networkadministrator.• If you are using WEP and the printed Network Configuration page in step p shows Link OK in theWireless Link Status, but the machine is not found, make sure you entered the WEP key correctly. TheWEP key is case sensitive.
