Wireless configuration for Macintosh using the Océ installer application695l If your network is configured for Authentication and Encryption, the following screen will appear. Whenconfiguring your machine, you must configure your machine to match the Authentication andEncryption settings you wrote down on page 63 for your existing wireless network. Choose theAuthentication Method and Encryption Mode from the pop-up menu in each setting box. Then enterthe Network Key and Confirm Network Key, and then click Next.Note• If you want to setup or configure additional WEP key indexes other than WEP key1, click Advanced.• If you do not know the Authentication or Encryption settings for your network, contact your networkadministrator or the manufacture of your access point / router.• If you are using WEP and the printed Network Configuration page in step m shows Link OK in theWireless Link Status, but the machine is not found on your network, make sure you entered the WEPkey correctly. The WEP key is case sensitive.
