Troubleshooting19714Wireless network troubleshooting 14Wireless setup problems 14The Océ print server is not found during setup by the Wireless Device Setup Wizard. 14a Make sure that the machine is powered on, is on-line and ready to print.b Move your machine closer to your access point/router (or your computer for Ad-hoc) and try again.c Reset the print server back to its default factory settings and try again. (For the information how to resetto the factory default settings, see Restoring the network settings to factory default on page 119.)Why do I have to change my machine’s network setting to “Wired LAN” during setup although I amtrying to setup Wireless LAN? 14If you are using Windows® 2000, Mac OS X 10.3.9 or greater or your computer is connected to the wirelessnetwork using a network cable, it is recommended you temporarily connect the machine to youraccess point/router, hub or router using a network cable. You will also need to change your machine’snetwork setting to wired LAN temporarily. Your machine’s network setting will be changed to wireless LANautomatically during the course of the setup. Windows ® :Using the Setup Wizard from the control panel on page 28Wireless configuration for Windows ® using the Océ installer application on page 36 Macintosh:Using the Setup Wizard from the control panel on page 28Wireless configuration for Macintosh using the Océ installer application on page 63
