3644Configuration in Infrastructure mode 4Before configuring the wireless settings 4IMPORTANT• The following instructions will install your machine in a network environment using the Océ installerapplication for Windows® found on the CD-ROM we have provided with the machine.• You can also setup your machine using the machine’s control panel which we recommended. You can findinstructions in the supplied Quick Setup Guide or see Configuring your machine for a wireless networkon page 19.• You must know your wireless network settings before you proceed with this installation.Make sure you take notes on all the current settings such as SSID, authentication and encryption of yourwireless network environment. If you do not know them, contact your network administrator or themanufacturer of your access point/router.Check and record the current wireless network settings.1 Pre-Shared Key (PSK) lets the Océ machine associate with access points using TKIP or AES encryption. Pre-Shared Key is 8 or morecharacters in length, up to a maximum of 63 characters.Wireless configuration for Windows ®using the Océ installer application 4Network name:(SSID, ESSID)Communication Mode Authentication method Encryption mode Network key 3Infrastructure Open system WEP 2NONE —Shared key WEP 2Pre-Shared Key 1(WPA/WPA2-PSK)AESTKIPLEAP CKIPEAP-FAST/NONEEAP-FAST/MS-CHAPv2EAP-FAST/GTCAESTKIP
