Configuring your machine for a network152c Double-click the unconfigured device.Note• If the print server is set to its factory default settings (if you do not use a DHCP/BOOTP/RARP server), thedevice will appear as Unconfigured in the BRAdmin Light utility screen.• You can find the node name and MAC Address (Ethernet Address) by printing the Network ConfigurationList.See Printing the Network Configuration List on page 119.d Choose STATIC from Boot Method (BOOT Method). Enter the IP Address, Subnet Mask andGateway (if needed) of your print server.e Click OK.f With the correctly programmed IP address, you will see the Océ print server in the device list.Windows® MacintoshWindows® Macintosh
