Application55-34 VL6522c/VL5522c/VL4522c5.45.4.3 Book Copy/RepeatBook CopyConfigure the scanning mode for copying a two-page spread original such as a book or a catalog. Forexample, you can copy a two-page spread original on a single page or on two separate pages.0 Place the original on the original glass.0 When [Book Spread] or [Separation] is selected, pressing the [Start] key starts printing.0 When [Front and Back Cover] is selected, the scanning operation starts with the front cover followedby scanning of the back cover, and ends with scanning of all two-page spreads of the body text in theorder of the page numbers.0 When [Front Cover] is selected, all two-page spreads are scanned in order after the front cover.0 When [Front and Back Cover] or [Front Cover] is selected, wait until all pages in the original are scannedand then press [Finish] and then the [Start] key to start printing.% Press [Application] ö [Book Copy/Repeat] ö [Book Copy].SettingsBook Spread Copies both pages of a two-page spread original as a one page original.Separation Copies the right and left pages of two-page spreads separately in the orderof the page numbers.Front Cover Copies the front cover, the right and left pages of two-page spreads sepa-rately in the order of the page numbers, and the back cover in this order.Front and Back Cover Copies the front cover, separate copies of each page in the page spreadsand the back cover in the original page order.Frame Erase Erases projection of the dark shadow around the book.Frame Configure the width of the area around the entireframe to be erased.Top, Right, Bottom,LeftConfigure the width of the top, right side, bottomand left side of the frame to be erased.None Select this settings to not erase the frame.Center Erase Erases projection of the dark shadow at the center of the book.Binding Position Select the binding position of the original.To indicate it, select [Separation], [Front Cover], and [Front and Back Cover].SURVEYOR’SREPORTSURVEYOR’SREPORT