VL6522c/VL5522c/VL4522c 5-395.4 Application 5d ReferenceTo set the zoom:Press [Basic] ö [Zoom].SettingsMargin Position Select an option from [Auto], [Left], [Top] and [Right].When Auto is selected, the binding position is automatically set.• This function automatically determines the binding position according tothe orientation of the loaded original. If the original length is 297mm orless, a binding position along the long side of the paper is selected. If theoriginal length is more than 297mm, a binding position along the shortside of the paper is selected.• The binding position is set on the upper or left-side end.• Be sure to load the original so that its top side is placed in the back. Ifthe document is loaded in any other orientation, this setting fails.Image Shift Adjust the image position according to the binding margin.Change Back Shift Adjust the image position on the back side of thepaper in the 2-sided copy mode.Adjust Value Enter the width of the binding margin (0.1 mm - 20.0 mm). When [None] isselected, the binding margin width is set to 0 mm.Original Direction Select the orientation of the original loaded into the ADF or placed on theoriginal glass.
