VL6522c/VL5522c/VL4522c 7-177.1 System Settings 7Half-Fold PositionAdjust the center staple & fold and half-fold positions.0 Before making any adjustments, create a sample using the half-fold function. Adjust the half-foldposition while checking the created sample.0 It can be adjusted only when the saddle sticher is installed.0 When adjusting the half-fold position in parallel with the left edge of paper, contact your servicerepresentative.1 Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]ö [Finisher Adjustment] ö [Half-Fold Position].2 Select the size of paper of which half-fold position is adjusted.3 Press [+] or [-] to adjust the punched hole position while checking the sample.4 Press [OK].5 Create a sample, and check the print result.Tri-Fold Position AdjustmentAdjust the folding position for each paper size when printing with the tri-fold function. The folding widthdepends on the paper size, which cannot be changed.0 Before making any adjustments, create a sample using the tri-fold function. Adjust the tri-fold positionwhile checking the created sample.0 It can be adjusted when the Finisher FS-526 and Saddle Stitcher SD-508 are installed.1 Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]ö [Finisher Adjustment] ö [Tri-Fold Position Adjustment].2 Select the size of paper of which tri-fold position is adjusted.3 Press [+] or [-] to adjust the tri-fold position while checking the sample.4 Press [OK].5 Create a sample, and check the print result.
