System Settings77-26 VL6522c/VL5522c/VL4522c7.17.1.9 Reset SettingsConfigure auto reset settings.0 All settings performed in the following tabs during operation using the copy function are automaticallyreset to the initial settings after the specified time has elapsed.Basic tab, Original Setting tab, Quality/Density tab, Application tab0 Even if [OFF] is selected for System Auto Reset Time, the system auto reset function operates whenthis machine is not used for one minute during user authentication/account track operations.% Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Reset Settings].SettingsSystem Auto Reset Priority Mode Configure a mode to be displayed in the systemauto reset mode.System Auto ResetTimeConfigure whether to perform system auto reset.Specify a time until the initial screen appears ifthis machine is not operated. The specified timeis not canceled.d ReferenceIf user authentication or enhanced se-curity mode is enabled, the adminis-trator settings mode or userauthentication mode is logged off ac-cording to the setting for System AutoReset Time.In the enlarge display mode, the sys-tem auto reset mode is disabled.Auto Reset Configure whether to perform auto reset in the selected mode.Specify a time until the basic settings screen appears and the settings arereset to the initial values if this machine is not operated.Job Reset When Account ischangedConfigure whether to reset the settings when youlog off if the user authentication or account tracksettings have been configured.When original is seton ADFConfigure whether to reset the settings when anoriginal is loaded in the ADF.Next Job Configure whether to reset the following settingswhen the next job is selected.• Staple Setting• Original Set/Bind Direction• Reset Data After JobThe destination of data is always reset.
