VL6522c/VL5522c/VL4522c 6-56.1 System Settings 6Auto Paper Select for SmallOriginalSpecify the paper size to be used for a case where the document placedon the original glass is too small to be detected in Auto Paper mode.Copy on Small Size Prints on A5 paper.• If A5 paper is not loaded in the tray, a mes-sage that instructs you to load A5 paper in thebypass tray appears.Copy on A4 Prints on A4 paper.Prohibit Copy Starts printing when a paper tray is selected man-ually and the [Start] key is pressed.Blank Page Print Settings Appears when user access is permitted under Administrator settings. Fordetails, refer to page 7-29.Page Number Print Posi-tionSpecify a page number print position when printing page numbers afterconfiguring 2-sided print or booklet settings. Select whether to print thepage numbers on a same position on all pages or on positions symmetricwith respect to the stapling position.Select Keyboard Select the keyboard type displayed by default in the touch panel.Factory defaultLanguage Selection EnglishMeasurement Unit Settings This value varies depending on the area.Auto Tray Selection Set-tingsTray PriorityTray 1 ö Tray 2 ö Tray 3 ö Tray 4 ö LCTLCT is displayed when the optional LCT is installed.Auto Tray Switch ON/OFF RestrictNo Matching Paper in TraySettingStop Printing (Tray Fixed)Print Lists • Tray 1• 1-SidedPost Inserter Settings Paper Tray: F1Paper Type: Plain PaperPaper size: Auto DetectPaper Type Plain paperPaper Size Auto DetectAuto Color Level Adjust. Standard (3)Low Power Mode Settings 15 min.Sleep Mode Settings 30 min.Print/Fax Output Settings Print: Page PrintFax: Batch PrintOutput Tray Settings • Copy: Tray 2• Print: Tray 2• Print Reports: Tray 1• Fax: Tray 1[Output Tray] is displayed when the Finisher FS-526, Finisher FS-527, orJob Separator JS-504 is installed.[Tray 3] is displayed if the Job Separator JS-603 is installed in the FinisherFS-527.AE Level Adjustment Standard (2)Auto Paper Select for SmallOriginalProhibit CopyBlank Page Print Settings Do Not PrintPage Number Print Posi-tionLeft & Right Bind: All the SameTop & Bottom Bind: All the SameSelect Keyboard Local KeyboardSettings
