Basic55-8 VL6522c/VL5522c/VL4522c5.15.1.3 ZoomThe original image size in the original can be enlarged or reduced.0 The auto zoom setting and the auto paper setting cannot be selected at the same time.0 If the auto zoom setting is selected and an enlargement is to be copied on paper larger than the original,load the original with the same orientation as the paper.% Press [Basic] ö [Zoom].d ReferenceTo set image rotation:Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Enlargement Rotation].SettingsAuto Automatically selects the most appropriate zoom ratio based on the size ofthe loaded original and the specified paper size.Full Size Copies the original image in the size identical to the original (100%).Manual • Enter the zoom ratio (25.0% - 400.0%) of the copy.• Under "Set Individual Zoom", you can enter different zoom ratios forthe X and Y directions.Set Zoom Enter the desired zoom and select the button toregister the value with."User Preset Zoom" indicates the registeredzoom.Minimal Copies an original image slightly smaller than the original size or the spec-ified size. The image in the original is centered on the paper without anycutoff.Select this setting when you want to copy the entire scope of the originalwithin the paper used.-/+ Configure the zoom ratio (25.0% - 400.0%) of the copy without changingthe aspect ratio.Fixed Zoom Select a preset zoom when copying from a fixed size original onto a fixedsize paper.User Preset Zoom Select a registered copy zoom value. To change the registered zoom val-ues, use [Set Zoom].
