Application55-22 VL6522c/VL5522c/VL4522c5.45.4.1 Sheet/Cover/Chapter InsertOHP InterleavePrevent copies printed onto OHP transparencies from sticking together because of the heat produced duringcopying by having paper (interleaves) inserted between the transparencies.0 Printing on OHP transparencies is possible only in black.0 Use interleaf paper with the same size as the OHP transparencies.0 The number of copies is fixed to one. You cannot change.0 The finishing function cannot be changed.0 Load transparencies into the bypass tray.0 Do not use a transparency that has been through the machine even once. It may lead to reduced printquality, a paper jam or a damage to the machine. (Even if a transparency has been discharged withoutprinting, it cannot be reused.)1 Load the original.2 Press [Basic] ö [Color] ö [Black].3 Load transparencies into the bypass tray. Load the interleave paper into the desired paper tray.4 Set the paper type of the bypass tray to [Transparency] and press [OK].5 Press [Application] ö [Sheet/Cover/Chapter Insert] ö [OHP Interleave].d ReferenceSetting Black for Color Settings:Press [Basic] ö [Color] ö [Black].SettingsInterleave Paper Select the paper tray loaded with paper with a transparency interleaf.Transparency Indicates the paper size of the loaded transparency.EFGHEFGHEFGHEFGHEFGHEFGHEFGHEFGHEFGH
