VL6522c/VL5522c/VL4522c 5-175.2 Original Setting 55.2 Original SettingConfigure the original status or original direction for outputting desired copies.% Press [Original Setting].SettingsMixed Original Loads originals of different sizes into the ADF and scan them at a time.Z-Folded Original Correctly detects the original size when folded originals are loaded into theADF and copied.Original Size Select [Auto] to detect the size of the original automatically.If the size of the original is not automatically detected, select the originalsize.Custom Size Enter the original size.Photo Size Select the photo size.Binding Position Specify the original binding position (page margin) to prevent the copyfrom being printed upside-down when scanning a 2-sided original,Auto Automatically configures the binding position ofthe original.• A binding margin along the long side of thepaper is selected if the original length is297mm or less.• If the original length is more than 297mm, abinding margin along the short side of the pa-per is selected.Original Direction Specify the original direction to load into the ADF or place on the originalglass when copying 2-sided originals or making 2-sided or combined cop-ies.Despeckle Reduces the influence of a dirt of the slit glass upon a copy output whenloading an original in the ADF.