VL6522c/VL5522c/VL4522c 7-137.1 System Settings 7Gradation Adjustment Adjust irregular gradation levels of print images.For details, refer to page 7-24.Image Stabilization Only Stabilize the image by pressing the[Start] key before performing grada-tion adjustment.Print Adjust the gradation when the colorgradation has been changed in a printimage. This function performs adjust-ment, emphasizing the gradation ex-pression of an image and thereproducibility of texts or lines.Copy Adjust the gradation when the colorgradation has been changed in a printimage. This function performs adjust-ment to save as many images as pos-sible in memory.Scanner Area Adjust the scan range of the scanner.For details on displaying this item, contact your service representative.ADF Adjustment Make adjustments for scanning images in the ADF.For details on displaying this item, contact your service representative.Line Detection Prior Detection Setting Configure whether to issue an alertwhen the original glass is dirty.• Select an alert display format andcontamination detection level.Detection While Feeding Setting Configure whether to remove dust anddirt on the original glass when scan-ning an original using ADF.Trail Edge Adjust Correct a shift if it is detected at the trailing edge of the print result.Place A3 w, 11 e 17 w, A4 v, or 8-1/2 e 11 v on the bypass tray, andthen press the [Start] key to print a test pattern.User Paper Settings Configure special paper settings for User Paper 1 through 6. Settings toconfigure include Basic Weight and Media Adjustment.For details on displaying this item, contact your service representative.Erase Adjustment Non-Image Area Erase Opera-tion SettingsConfigure Non-Image Area operationsettings.[Auto]:Automatically detects the backgrounddensity of the original, and selects ei-ther "Bevel" or "Rectangular" accord-ingly.[Specify]:Allows you to manually specify anerase method and original density. Asan erase method, select "Bevel" or"Rectangular". Specify an originaldensity from five levels.Factory defaultAE Level Adjustment Standard (2)Leading Edge Adjustment 0.0 mmCentering 0.0 mmLeading Edge Adjustment(Duplex Side 2)0.0 mmCentering (Duplex 2ndSide)0.0 mmMedia Adjustment AutoCenter Staple Position 0.0 mmSettings
