The [Proof Copy] key44-20 VL6522c/VL5522c/VL4522c4.11Using a preview image to check the copy result (Advanced Preview)Check the finishing image of a copy in the touch panel before printing. This prevents copy errors fromoccurring.0 When you scan the original using the Program Jobs function, scan all originals, press [Finish], and thenpreview the finishing state.0 When you attempt to scan the original with an insert page specified, the machine scans the original first,and then the insert original. When this process is complete, you can preview the finishing state.0 To use the Book Copy or Booklet function, no preview is available. Check the finishing state afterprinting.0 The Punch settings are available only if the Punch Kit PK-516 or Z Folding Unit is installed on theFinisher FS-526 or the Punch Kit PK-517 is installed on the Finisher FS-527.0 Fold and Center Staple & Fold is available only if the Saddle Stitcher is installed on the optional Finisher.0 The Z-fold settings are available only if the Z Folding Unit is installed on the optional Finisher FS-526.1 Load the original.2 Select the desired copy settings.3 Press the [Proof Copy] key.4 Press [Preview on Screen] for the proof copy method and then select the original direction.5 Press the [Start] key.The Preview (View Status) screen appears.6 Check the preview image.% To change the settings, press [View Pages]. Go to Step 7.% To start printing, press the [Start] key.% To scan another original, press [Finish], load the original, and then press the [Start] key.7 Change the settings, and then press [View Status].
