VL6522c/VL5522c/VL4522c 5-635.5 Left panel display 55.5.1 Job ListFrom the Job List screen, lists of jobs being performed by this machine and the jobs that have beenperformed in addition to the job details can be viewed, and the job settings can be changed.0 If user authentication settings have been applied and the machine is set so that jobs cannot be deletedby other users, the job is not deleted.0 If an Administrator Settings parameter was set so that the output priority of jobs cannot be changed,[Increase Priority] does not appear and the output priority of the jobs cannot be specified.0 When there is a job being printed, another job can be registered. Up to 251 jobs can be registered intotal.% Press [Job List] ö [Job Details] ö [Print].SettingsPrint Opens the screen for checking print jobs.Send Opens the screen for checking fax and scan transmission jobs. For de-tails, refer to the "User's Guide [Network Scan/Fax/Network Fax Op-erations]".Receive Opens the screen for checking fax reception jobs. For details, refer tothe "User's Guide [Network Scan/Fax/Network Fax Operations]".Save Opens the screen for saving jobs. For details, refer to the "User'sGuide [Box Operations]".Current Jobs Lists the jobs currently processed. Check the current status.Delete Deletes a job.Increase Priority(Displayed for the listof print jobs in proc-ess)The currently processed print job is interrupt-ed and printing of the job given priority be-gins. Printing of the interrupted job isautomatically restarted once printing for thejob given priority is finished.If the currently processed print job cannot beinterrupted because it contains Fold or Sta-ple, the job given priority is executed after thecurrently processed print job has been com-pleted.Release Held Job(Displayed for the listof print jobs in proc-ess)Select to switch to the held job list andchange the settings of, print, or delete a heldjob.The held job list contains jobs that could notbe printed because, for example, systemauto reset was activated during the proofcopy.• If desired, press [Change Settings] tochange the copy settings.• For confirmation, press the [Proof Copy]key to print a copy from a stored job.