VL6522c/VL5522c/VL4522c 7-537.10 Security Settings 77.10.5 Enhanced Security ModeThe enhanced security mode cannot be enabled when any of the current functional settings conflict with theenhanced security mode.When the enhanced security mode is enabled, the settings required for the mode or the settings that havebeen forcibly switched when entering the mode cannot be changed.Required settingsTo enable the enhanced security mode, the following settings must have been configured.Settings to forcibly changedWhen the enhanced security is enabled, the following settings are forced.- The changed settings will not revert when the enhanced security mode is turned off.- After the password rules have been changed, any passwords that do not comply with the changed ruleswill not be authenticated. For details on the password rules, refer to page 7-51.- For details on the network settings to be forcibly changed, refer to the "User's Guide [NetworkScan/Fax/Network Fax Operations]".Administrator Settings Required settingsUser Authentication/Account Track / General Set-tings / User AuthenticationSelect either [ON (External Server)] or [ON (MFP)].• When you enable account track, select [Ac-count Name & Password] for the account trackinput method.Security Settings / Administrator Password Set a password complying with password rules.Security Settings / HDD Settings / HDD Lock Pass-wordSet an HDD lock password.[Security] in Web Connection / PKI Settings / SSLSetting• Set [Mode using SSL/TLS] to [Administratormode] and [User mode].• Set [Encryption Strength] to [AES-256] or[3DES-168].• Image controller setting• Management function setting• CE password• CE authentication function• HDD installation settingAll the settings above must be configured by yourservice representative.These items must be configured by your servicerepresentative. For details, contact your servicerepresentative.Administrator Settings Settings to forcibly changedSystem Settings / Restrict User Access / RestrictAccess to Job Settings / Registering and ChangingAddressesSet to [Restrict].User Authentication/Account Track / General Set-tings / Pubic User AccessSet to [Restrict].User Authentication/Account Track / User Authen-tication Settings / Administrative Settings / UserName ListSet to [OFF].User Authentication/Account Track / Print withoutAuthenticationSet to [Restrict].Security Settings / User Box Administrator Setting Set to [Restrict].Security Settings / Security Details / PasswordRulesSet to [Enable].Security Settings / Security Details / ProhibitedFunctions When Authentication ErrorSet to [Mode 2], and the number of tries is set to 3.• The number of tries can be changed to 1, 2, or3.Security Settings / Security Details / ConfidentialDocument Access MethodSet to [Mode 2].
