SENDING AN IMAGE19SCANNING AND TRANSMITTING A TWO-SIDED ORIGINAL(when using B/W scanner module/DSPF)If a B/W scanner module/DSPF is installed, a two-sided original can be automatically scanned and transmitted usingthe automatic document feeder. Follow the steps below.1 Make sure the machine is in scanner modeand then load the document in theautomatic document feeder.2 Touch the [ORIGINAL] key.When you touch the[ORIGINAL] key, checkthe original sizedisplayed in the key.3 Touch the [2-SIDED BOOKLET] key or the[2-SIDED TABLET] key as appropriate forthe original you loaded.If necessary, touch the[SCAN SIZE] key andset the original size.(page 20)4 Touch the [OK] key.You will return to theinitial screen.A two-sided original icon appears next to the[ORIGINAL] key.(Example: The icon that appears when the [2-SIDED BOOKLET] key is touched.)5 Continue from step 4 of "BASICTRANSMISSION METHOD" (pages 12 to 15).ORIGINAL300x300dpiRESOLUTIONPDF MMR(G4)FILE FORMATAUTO 8½X11100% AUTO2-SIDEDBOOKLET 2-SIDEDTABLETSCAN SIZE SEND SIZEAUTO 8½X11AUTORESENDOKSIZEORIGINAL300x300dpiRESOLUTIONPDF MMR(G4)FILE FORMATAUTO 8½X11NOTESO Booklets and tabletsTwo-sided originals that are bound at the side are booklets, and two-sided originals that are bound at the top are tablets.O Two-sided scanning turns off after the document is stored in memory.Pressing the [CA] key will also cancel two-sided scanning.BOOKLET TABLET
