SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT)23SELECTING THE EXPOSUREYou can adjust the exposure manually to match the type of original. After loading the original in scanner mode, followthe steps below. The default setting for the exposure is "AUTO".Q Change the exposure1 Touch the [EXPOSURE] key.2 Select [AUTO] or [MANUAL].If you selected [AUTO],the exposure will beadjusted automatically.If you selected[MANUAL], touch theor key to adjustthe exposure. (Fordarker contrast, touchthe key. For lightercontrast, touch thekey.)3 Touch the [OK] key.You will return to theinitial screen.SELECTING THE RESOLUTIONThe resolution for scanning an original can be selected. Load the original in scanner mode and then follow the stepsbelow. The default setting for the resolution is "300x300dpi" (E-MAIL/FTP mode) or "STANDARD" (Internet-Faxmode).Q Change the resolution1 Touch the [RESOLUTION] key. 2 Touch the desired resolution key.E-MAIL/FTP modeFour selections are available for the resolution.Touch the desired resolution key depending onthe original to be scanned.The selected key is highlighted.300x300dpiRESOLUTIONPDF MMR(G4)FILE FORMATAUTOEXPOSUREAUTO 8½ 11AUTO MANUALO1 3 5AUTO MANUALO1 3 5NOTESO The default value of exposure can be set using thekey operator program, "Default exposure settings"(page 56).O When using the automatic document feeder, theexposure setting cannot be changed oncescanning has begun.AUTO MANUALOK1 3 5300x300dpiRESOLUTIONPDF MMR(G4)FILE FORMATAUTOEXPOSUREAUTO 8½ 11 AUTOORIGINALRESOLUTIONAUTOREADY TO SEND.EXPOSUREPROGRAMMEDFILE FORMAT200x200dpi300x300dpi400x400dpi600x600dpiHALF TONEOK
