Oce im4511 Operation Manual

Also see for im3511: Programming Date & Time Facsimile operation manual Operation manual Operating manual Operator's guide

Contents

Oce im4511 Operation Manual Manual pdf 25 page image

SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT)24For resolution other than [200x200dpi], the [HALFTONE] key can be selected.Internet-Fax modeFive selections are available for the resolution.Touch the desired resolution key depending onthe original to be scanned.For resolutions other than [STANDARD], the[HALF TONE] key can be selected.3 Touch the [OK] key.You will return to theinitial screen.SELECTING THE FILE FORMATWhen you send an image to one or more recipients using Scan to E-mail or Scan to FTP, the [FILE FORMAT] keyenables you to temporarily override the individual file format settings (FILE TYPE / COMPRESSION MODE) storedfor each recipient and send the image to all of the recipients using a single file format setting."PDF MMR (G4)" is initially selected.1 Touch the [FILE FORMAT] key.2 Select the file type and the compressionmode.(a) When the "SPECIFIED PAGES PER FILE"checkbox is not selected, all scanned pagesare combined into a single file. When thecheckbox is selected, one file is created perpage from pages specified with.(b) Touch the or key to set the number ofpages from which a file is created.3 Touch the [OK] key.You will return to theinitial screen.AUTOORIGINALRESOLUTIONAUTOEXPOSURE STANDARDFINESUPER FINEULTRA FINE600x600dpiREADY TO SEND.200x100 ( dpi )200x200200x400600x600400x400 HALF TONEOKNOTESO The initial factory resolution setting is 300x300dpi(E-MAIL/FTP mode) or Standard (Internet-Faxmode). If desired, you can change the initialsetting to a different setting using the key operatorprogram, "Initial resolution setting" (page 55).O When using the automatic document feeder, theresolution setting cannot be changed oncescanning has begun.HALF TONEOKORIGINAL300x300dpiRESOLUTIONPDF MMR(G4)FILE FORMATEXPOSUREAUTO 8½X11TIFFPDF MH ( G3 )MMR ( G4 )NONEFILE TYPEPROGRAMMED(1-99)RESENDOKSPECIFIED PAGES PER FILECOMPRESSION MODE300x300dpiORIGINALRESOLUTIONAUTOEXPOSUREFILE FORMAT(a) (b)AUTO 8½X11READY TO SEND.NOTESO The initial file format setting can be changed withthe key operator program "Initial file formatsetting" (page 56).O Even if you change the settings in the FILEFORMAT setting screen, you can return to thesettings stored for each recipient by selecting"PROGRAMMED" once again. The[PROGRAMMED] key returns the file type to thestored file format settings.O When you perform a broadcast transmission, thecompression mode selected in the key operatorprogram, " Compression mode at broadcasting"(page 56), has precedence over the others.MH ( G3)MMR ( G4)NONE(1-99 )OKPER FILECOMPRESSION MODE