SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT)226 Enter the X (width) and Y (length) dimensionsof the original with the keys.X (width) is initiallyselected.Enter X and then touchthe ( ) key to enter Y.A width of 2-1/2" to 17"(64 to 432 mm) can beentered in X, and alength of 2-1/2" to 11-5/8" (64 to 297 mm) can beentered in Y.7 Touch the outer [OK] key.The original size entered in step 6 is stored in thekey selected in step 5.To exit, touch the [ORIGINAL] key.8 When you touch a key that shows anoriginal size in step 5, a message screenappears that contains the keys [CANCEL],[DELETE], and [AMEND].OTo cancel the procedure, touch the [CANCEL]key.OTo delete the selected original size, touch the[DELETE] key.OTo change the original size stored in the key,touch the [AMEND] key. The screen of step 6will appear to let you change the size.9 To exit, touch the [ORIGINAL] key.Q Using a stored original size1 Follow steps 1 to 3 of "STORING ORDELETING AN ORIGINAL SIZE".2 Touch the original size key that you wishto use.3 Touch the [OK] key.The stored original size is called up.ENLARGEMENT TRANSMISSIONIf the original size for scanning is not a long size or a non-standard size, you can enlarge a transmission by specifyingthe size that is to be sent.1 Touch the [ORIGINAL] key.2 Touch the [SEND SIZE] key.The sizes that can beselected as the sendsize are displayed.*If a B/W scannermodule/SPF is installed,the [2-SIDED] keys arenot displayed.3 Touch the desired send size key.If you wish to select anAB size, touch the [AB]key and then touch thedesired send size key.4 Touch the [OK] key.The specified size isdisplayed as the sendsize.5 Touch the [OK] key.You will return to theinitial screen.CANCEL OK1711(2 1/2 17)inchRECALLYXAXYSTORE/DELETE(2 1/2 11 5/8)inchRECALL STORE/DELETEX5 Y101/2 1/8ORIGINAL300x300dpiRESOLUTIONPDF MMR(G4)FILE FORMATAUTO 8½X11100% AUTOOK2-SIDEDTABLETSEND SIZEOKINCHAB5 X88 X148 X1311X17218 X11R218 X11212121 215 X8 R21 21OKINCHAB8 X148 X1311X17212111x17OKSIZE