Scanning Methods- 104 -Scan to Network PCYou can send a scanned document to a server onthe network.The document is scanned and converted to aPDF, JPEG, TIFF, or XPS file. The factory defaultsetting is PDF.Notez Check that the machine is connected to the network.z It is necessary to set up Scan To Network PC in advance.Referencez For the Scan To Network PC setup, please refer to "SettingUp Scan To Network PC" P. 62.1 Press the <SCAN> key on the operatorpanel.2 Place your document with text face up inthe ADF or face down on the documentglass.3 Press the to select [Network PC] andthen press .4 Check that [Select Profile] is selectedand then press .5 Press the to select a profile and thenpress .6 Press or .Scan to USB MemoryYou can save the scanned document in a USBmemory.Referencez For the specifications of USB memory that you can use, pleaserefer to "Print From USB Memory Specifications" P. 175.1 Press the <SCAN> key on the operatorpanel.2 Place your document with text face up inthe ADF or face down on the documentglass.3 Insert the USB memory into the USBmemory interface of the machine.Notez Insert the USB memory into the USB port straight. If itis not inserted with a correct angle, the USB port maybe damaged.4 Press the to select [USB Memory]and then press .5 Press the to scanning settings ifnecessary.6 Press or .7 Remove the USB memory from the portafter the message is displayed indicatingthat it is OK to remove the USB memory.OKOKOKMONO C OLOROKMONO C OLOR
