Other Issues- 150 -Copying IssuesMemoz If the following information does not solve your trouble, contact your dealer.Unable To CopySymptom Point to check Remedy ReferenceUnable to copy. Is the machine turned on? Hold down the power switch forabout a second to turn on thepower.P.20Is the machine initializing? Wait until initializing is done. -Is your document properly loadedon the machine?Load the document properly on themachine.P.38Is there paper in the tray? Load paper in the tray.Or, check that the paper cassette isinstalled on the machine.P.32Is the proper size of paper for yourdocument loaded in the tray?Load the proper size of paper foryour document.P.32Is the paper tray selectable when[Paper Feed] is set to [Auto]?Press the <SETTING> key andselect [Paper Setup] > [SelectTray] > [Copy] > the paper trayon which the paper you use isloaded, and then select [ON] or[ON(Prior)].-Is the loaded paper compatiblewith duplex printing?Duplex copying cannot be donedepending on the paper size,document type, or documentweight.Load the right paper for duplexprinting and configure the papersize, document type, anddocument weight correctly.P.32Is the media type of the paper trayset to [Plain] or [Recycled]?When setting [Paper feed] to[Auto], set the media type for thepaper tray to [Plain] or[Recycled].P.36Is there a paper jam? Check the error message andremove any jammed paper.P.126Is there an empty toner cartridge? Replace it with a new tonercartridge.P.162Is the image drum at the end of itslife?Replace it with a new image drum. P.163Are any covers on the machineopen?Close all the covers. P.15Is an error occurring? Clear the error. P.132Is another job in progress? Start copying after the other job iscomplete.-Is a print job from a computer orother device in progress?Wait until printing is complete. -Is a fax being transmitted in realtime?Wait until the transmission iscomplete.-
