Error Messages- 132 -z Error MessagesThis section explains the causes and remedies for the error messages displayed on the display screenand the function of the <STATUS> key.Error Messages Displayed on the ScreenMemoz In the following lists:- "%COLOR%" indicates K (black)- "%TRAY%" indicates tray 1, tray 2 or the MP tray- "%ERRCODE%" indicates an error code- "%FS_ERR%, "%CODE%", and "%FATALSTRING1%" indicate detailed information of errors- "%MEDIA_SIZE%" indicates paper size- "%MEDIA_TYPE%" indicates a paper type- "%COVER%" indicates Top Cover or Rear Cover.z If the displayed message includes "Please see Help for details", you can check countermeasures for the error by pressing the<?HELP> key on the operator panel.z If in the displayed message there is " to Close", press on the control plan to remove the error.Referencez For details on the function of the <STATUS> key, refer to "Checking the Machine's Status From the Key" on P. 143.General Error Messages for All FunctionsErrorcode Message key Cause/RemedyInspection is required.PU Flash ErrorBlinks Firmware error occurred.Contact your dealer.Inspection is required.PU Communication ErrorBlinks Firmware error occurred.Contact your dealer.%COLOR% Toner Low.Please see Help for details.Lightsup*The toner cartridge of the indicated color is low.Prepare a new toner cartridge.* If the <SETTING> key > [Admin Setup] > [Device Man-agement] > [System setup] > [Near life LED] is set to[Disable], the <STATUS> key does not turn on.Image Drum Unit Near Life.Please see Help for details.Lights up* The Image Drum Unit is near the end of its life.Prepare a replacement image drum.* If the <SETTING> key >[Admin Setup] > [Device Man-agement] > [System setup] > [Status in Near life] is setto [Enable] and [Near life LED] is set to [Disable], the<STATUS> key does not turn on.If [Status in Near life] is set to [Disable], this message isnot displayed and the <STATUS> key does not turn on.413 %COLOR% Toner Empty%ERRCODE%Please see Help for details.Blinks The toner cartridge of the indicated color isempty.Replace it with a new toner cartridge.413 : K%COLOR% Toner EmptyPlease see Help for details.Lights up The toner cartridge of the indicated color isempty.Replace it with a new toner cartridge.OK OK
