Authentication by User Name and Password- 123 -User Authentication and Access Control6z Authentication by User Name and PasswordThis section explains how to enable the access control using the authentication by the user name andpassword and how to operate when the access control is enabled.Registering User Name andPasswordBefore enabling user authentication and accesscontrol, be sure to register a user name and apassword for each user. You must be theadministrator to register user names andpasswords.To register a user name and password, launchPIN Manager from Configuration Tool.Referencez For details on how to register a user name and passwordfrom Configuration Tool, refer to the User's ManualAdvanced.Enabling Access ControlYou must be the administrator to control accessto the machine.1 Press the <SETTING> key on theoperator panel.2 Press the to select [Admin Setup]and then press .3 Enter the administrator password.The default password is "aaaaaa".4 Select [Enter] and then press .5 Press the to select [Management]and then press .6 Press the to select [System Setup]and then press .7 Check that [Access Control] is selectedand then press .8 Press the to select [User/Password]and then press .9 Press the to select [UserAuthentication Method] and thenpress .10 Check that [Local] is selected and thenpress .Referencez When you select [LDAP] or [Secure Protocol], theserver settings are necessary. For details, refer to theUser's Manual Advanced.11 Press the until the message of "AccessControl has been enabled." is displayed.Operation When User Name andPassword Authentication is EnabledLogging Into the Machine1 Check that [User Name] is selected andthen press the .2 Enter your name.3 Select [Enter] and then press .4 Check that [Password] is selected andthen press the .5 Enter your password.6 Select [Enter] and then press .7 Press on the [Login] screen, press .If authentication succeeds, the top screenappears.Referencez For details on how to enter text, refer to "Entering TextUsing the Operator Panel" on P. 26.Logging Out of the MachineWhen you have finished operations, be sure tolog out of the machine.1 Press the until the top screen appears.2 Press the <RESET/LOG OUT> key onthe operator panel.OKOKOKOKOKOKOKOKOKOKOK
