Installing Your Machine- 20 -Turning On Your Machine1 Plug the AC cable into the AC powersocket of your machine.2 Plug the AC cable into the electric socket.3 Check that no documents are on the documentglass or ADF, and the ADF cover is closed.4 Hold down the power switch for about asecond to turn on the power.The copy standby screen is displayed afteryour machine became ready status.Notez Turn the power off, and when turning the power back onagain, push the power switch after waiting for a few seconds.Turning Off Your MachineBe sure to follow the procedure below every timeyou turn off the machine.1 Hold down the power switch for about asecond.Notez Press the power switch for less than 5 seconds.The message [Shutdown in progress.Please wait. The machine turns offautomatically.] appears in the operatorpanel, and power switch indicator blinksevery 1 second. Then the machine turnsoff automatically and power switchindicator goes out.Notez Turn the power off, and when turning the power back onagain, push the power switch after waiting for a few seconds. When the machine is not used forlong timeWhen the machine is not used for long time dueto holidays or trips, pull the power cord from thesocket.Memoz The machine does not have functional failures if removingthe power plug for long time (more than 4 weeks).Power Save Mode and Sleep ModeThe two-phase power saving mode enables youto save the power consumption of the machine. Power Save ModeWhen your machine is not used for a certainperiod of time, it automatically enters a powersaving mode to reduce the power consumption.You can enter the power saving mode manuallyby pressing the <POWER SAVE> key on theoperator panel.
