Other Issues- 158 -Machine IssuesMemoz If the following information does not solve the trouble, contact your dealer.Symptom Point to check Remedy ReferenceTurned on the machine,but it stays "Off-Line".The AC cable is unplugged. Hold down the power switch forabout a second to turn on thepower and then plug in the ACcable firmly.-The power is out. Check if the power is beingsupplied to the electric outlet.-The machine does notoperate.The AC cable is not firmly plugged in. Plug in the AC code firmly. -The machine is turned off. Hold down the power switch forabout a second to turn on thepower.P.20The power turned offautomatically because ofthe auto power offfunction, and does notresponse.The power turned off automaticallybecause it has passed the autopower off time.Please turn on the power. -The printer does noresponse.The printer is in error status. Press the power switch for morethan 5 seconds and turn off thepower. And then turn on the poweragain.-The machine does notstart printing.An error is displayed on the panel. Check the error code and followthe on-screen instructions.P.132The Ethernet or USB cable isunplugged.Plug in the Ethernet or USB cablefirmly.P.47P.55Something is wrong with theEthernet or USB cable.Use another Ethernet or USB cable. -The machine does not support yourEthernet or USB cable.z Use a USB 2.0 compatible cable.z Use an Ethernet 10BASE-T/100BASE-TX compatible cable.-Something may be wrong with theprinting function.Press the <SETTING> key andselect [Reports] > [Configura-tion] and print out the configura-tion list to check the printingperformance.P.72The interface is disabled. Press the <SETTING> key andselect [Admin Setup] > [Net-work Menu] > [Network Setup]and enable the interface you areusing.-The printer driver of the machine isnot selected.Set the printer driver of themachine as the default printer.-The specified port of the printerdriver is wrong.Specify the port the Ethernet orUSB cable is connected to.-The display screen isblank.The machine is in the sleep mode. Check if the <POWER SAVE> keylights up and press the <POWERSAVE> key to activate themachine.P.20Print data is nottransmitted to themachine.The Ethernet or USB cable isbroken.Connect a new cable. -The time-out period set on thecomputer has passed.Set a longer time-out period. -
