Operator Panel- 26 -Default ScreenTurn the power on, and when the machine is inthe state in which it can be used, the Copy Startscreen will be displayed as the default mode.You can switch to other functions by using themain function keys.Referencez You can change the default screen by pressing the<SETTING> key on the operator panel and then selecting[Admin Setup] > [Management] > [Default Mode].For details, refer to the User's Manual Advanced.Entering Text Using theOperator PanelWhen you need to enter text while setting anitem, the entry screen shown below appears.You can enter upper and lower case letters,numbers and symbols with the screen keyboard.Memoz When you need to enter only numbers, the screenkeyboard may not appear. In this case, enter numbersusing the ten-key pad.14 <RIGHT> key z Proceeds to the next screen.z Shifts the highlighted selection to the right while an item isselected or characters are entered.15 <OK> key z Confirms the highlighted item.z Selects an item to be checked.16 <BACK> key Returns to the previous screen.17 <CLEAR> key Executes the following actions according to the enteredz Minimizes a setting value.z Enters zero for a setting value.z Clears what is entered.z Cancels a selected item.18 <POWER SAVE> key z Enters or exits the power saving mode.z Exits the sleep mode.Lights up in green while in the modes.19 <DATA IN MEMORY> indicator(for MB471, MB491, ES4191 MFP)Lights up when data is in memory.* Sleep mode does not light up even if data in memory.20 One-Touch key pad Accesses a registered e-mail address or fax number.8 keys x 2 groups which is 16 entries in total (Press the <SHIFT>key to switch the groups)21 <JOB MACRO> key(for MB471, MB491, ES4191 MFP)Switches to the job macro screen.22 Qwerty keyboard(for MB471, MB491, ES4191 MFP)Enters text.It is under the one touch key pad.No. Name Function
