- 73 -Copying22. CopyingThis chapter explains the basic operation and settings for your machine's copy function.z Basic OperationThis section explains how to start and cancel copy job.Starting a Copy Job1 Press the <COPY> key on the operatorpanel to open the copy standby screen.2 Place your document with text face up inthe ADF or face down on the documentglass.3 Configure the copy settings if necessary.4 Enter the number of copies using theten-key pad.- You can enter up 1 to 99 sets.- If you have entered an incorrect value, press the<CLEAR> key and then enter the correct value.5 Press to start copying.Referencez For details on how to configure each copy setting, refer to"Configuring Copy Settings" P. 74.z For details on how to load your documents in the ADF or onthe document glass, refer to "Loading Documents" P. 38.Canceling a Copy Job inProgressYou can cancel copying until the messageshowing the copy completion is displayed.1 Press the <STOP> key on the operatorpanel.Notez When you take a copy with the document glass, do notapply an excessive load to the document glass.MONO
