Loading Paper and Documents- 37 -Setup1Paper OutputYour machine outputs to the facedown or faceupstacker. Paper types that can be outputted toeach stacker are as follows.When performing duplex printing, paper outputsto the facedown stacker.Notez Do not open or close the faceup stacker while printing as itmay result in a paper jam. Using the Facedown StackerDelivers paper with the print side face down.Notez Check that the faceup stacker on the rear side of themachine is closed. If the faceup stacker is open, paper isalways outputted to the faceup stacker. Using the Faceup StackerDelivers paper with the print side face up.Notez The faceup stacker is not available in duplex printing.1 Pull the faceup stacker on the rear sideof the machine and open it toward you.2 Unfold the faceup stacker.DocumentsYou can use the auto document feeder (ADF) orthe document glass to load documents forcopying, scanning or faxing.Document RequirementsYou cannot load the following documents on theADF. Use the document glass instead:z Torn or perforated paperz Curled or rolled paperz Wet paperz Static paperz Carbon-backed paperz Fabrics, metallic sheets or Transparency filmsz Paper with staples, paper clips, ribbons, or tapez Pasted paper, paper with gluez Glossy paperz Specially coated paperKeep the followings in mind to avoid damagingthe document glass:z Do not hold a document firmly on the glass whencopying a thick document.z Place hard documents gently.z Avoid loading documents with sharp projections.OutputStackerSupportedpaper typePaper outputcapacityFacedown z Standardz Recycledpaperz 150 sheets (whenpaper weight is lessthan 80 g/m2)
