Handbook | 333 Your MFP grips the documents, and pulls the bottom pageinto the machine.If necessary, use the Transmit Resolution or Yes ß key toset the resolution of your document.Document Type Resolution ResolutionTo Use of ScanNormal office STD (Standard) 200 x 100 dpidocumentsDocuments with small FINE or EX.FINE FINE: 200 x 200 dpitype or other fine details EX. FINE 200 x 400 dpiDocuments with photos PHOTO 300 x 300 dpior many shades of gray4 If necessary, use the Type of Original/No © key to set thelevel of contrast in your document.Document Type Contrast to UseDocuments with normal contrast NORMAL(default setting)Documents that are too light LIGHTDocuments that are too dark DARK5 Your Documents are now ready for faxing or copying.Sending a Fax to a Single Location1 Load your documents.2 Select a location. Refer to the instructions below.To Dial Using Do ThisA One Touch key Press the One Touch key.An Auto Dial number Press the Auto Dial key, then enterthe two digit Auto Dial numberson the numeric keypad.The numeric keypad Dial as you would on a normaltelephone. If you make a mistake,press theYes ß key back up onespace and re-enter the number.An external telephone Pick up the handset of yourexternal telephone and dial thenumber of the machine you wishto transmit to. If the receiving faxmachine is in automatic receptionmode, you will hear a high-pitchedtone. If a person answers thephone, ask them to press the Startkey on their fax machine.3 If necessary, press the Start key to begin the transmission.
