Oki OKIOFFICE 84 User Handbook Manual

Also see for OKIOFFICE 84: Setup guide Quick reference Regulatory information User handbook User guide

Contents

64 | HandbookSetting Your MFP’s Distinctive Ring1 Press the Select Function key.2 Press the 9/User Program One Touch key. The displayshows 1:FUNC. PROGRAMMING.3 Press the Yes ß key. The display shows FUNCTION NO. [ ].4 Using the numeric keypad, enter 12. The display showsDISTINCTIVE RING, OFF.5 Press the No © key. The display will change toDISTINCTIVE RING, SET.6 Press the Yes ß key. The display changes to SETUP FAXRING, CALL FAX NUMBER NOW.7 Using a separate telephone line, immediately dial thenumber assigned to the MFP (you must do this within 90seconds). When your MFP begins to ring, your MFPautomatically detects and remembers its assigned ringpattern. When your MFP has finished programming itsring pattern, the display show RESULT=OK.! Occasionally, your MFP may not be able to detect itsring pattern on the first try. If this happens, the displaywill show RESULT=NG. Follow the instructions againfrom Step 6.8 Press the Yes ß key to confirm your selection.9 Press the Select Function key to finish.Dial Parameter SettingsThese functions allow you to control the way your MFP dialstelephone numbers. Refer to Dial Parameter Settings List todetermine which settings you may need to change, then referto Changing Your Dial Parameter Settings to make thechange.Note: The Factory Default setting is in bold italics.! Some settings are not available in some countries. Ifyou have trouble accessing a dial parameter settinglisted here, contact your dealer for assistance.Dial Parameter Settings ListREDIAL TRIES: This function controls how many timesyour MFP will automatically redial a number that is busy orwhich does not answer. Available settings are from 0 to 10tries. Default setting is 3 tries.REDIAL INTERVAL: The function controls how long yourMFP waits between each automatic redial attempt. Availablesettings are from 1 to 6 minutes. Default setting is 3 minutesbetween dialing attempts.DIAL TONE DETECT: This function allows your MFP towait for and detect a dial tone before proceeding withdialing. Available settings are on and off.