Handbook | 414 Using the numeric keypad, enter 28. The display shows28:ONE TOUCH PARAM.5 Press the One Touch key for the location whose settingsyou want to change. The display shows ECHOPROTECTION, [OFF].6 Press the No © key to switch Echo Protection on.7 Press the Yes ß key to confirm your selection. Thedisplay shows FAX SPEED, [14.4k].! You may want to try lowering this location’s fax speedto 9.6k or 4.8k if you continue to have communicationproblems.8 Press the No © key until the selection you want appearson the display.9 Press the Yes ß key to confirm your selection. Thedisplay shows 2:ONE TOUCH PARAM. [ ].10 Press the Select Function key to finish.! Switch Echo Protection back off if you later change thelocation the One Touch key is used for as this settingincreases the time to connect.Locating Unassigned One Touch or AutoDial NumbersYou can also use the Search key to search for unassigned OneTouch keys and Auto Dial numbers.1 Press the Select Function key2 Press the 9/Location Prog One Touch key. The displayshows LOCATION PROGRAMMING ENTER(SRCH,OT,A/D,#)3 Press the Search key4 The display shows the next unassigned One Touch keyor Auto Dial number.Chain DialingEach fax number that you enter or program into your MFPcan be up to 32 digits long. If you need to dial a numberwhich is longer than 32 digits, use the chain dial feature.To create a chain dial number:1 Program the first 31 digits of the number into a OneTouch key or Auto Dial number.2 Press the 8/+ One Touch key.3 Program the rest of the number into another One Touchkey or Auto Dial number (or, you can leave the second
