40 | Handbook7 Enter the Location ID. This is a descriptive title up to 15characters long. Refer to the instructions below.To Do This UseEnter numbers Numeric keypad (press once)Enter spaces Space One Touch keyEnter Hyphens (-) Hyphen keyEnter alphabet characters Locate the character youwant on thenumeric keypad.Press that key repeatedlyuntil the desired characterappears.Enter a unique character Press the 0/Unique keyrepeatedly until thecharacter you want appears.The following characters areavailable: ! # & ‘ ( ) * +, - . / : ; = ? ⋅ ä ß ñ ö ü ÆÅ Ø æ å ø.Enter two letters using the Press the No © key tosame key. move to the next position.Move the cursor to make Press the Yes ß and No ©corrections. keys.8 Press the Start key. The display shows NO=LOCATION>.9 Enter the alternate fax number. Refer to the instructionsfollowing Step 5.10 Press the Start key to finish programming the One Touchkey. The display shows LOCATION PROGRAMMING.11 To continue programming One Touch keys, go back toStep 3. If you are finished programming, press the SelectFunction key.12 Lift off the plastic cover above the One Touch label.Using a pencil, write in the name for your newly-programmed One Touch key. Then replace the cover.One Touch ParametersIf you are experiencing problems communicating with aremote location in a very noisy telephone area, or an overseaslocation, set up a One Touch key for that location and tryturning Echo Protection on for that One Touch key.1 Press the Select Function key.2 Press the 9/User Program One Touch key. The displayshows 1:FUNC. PROGRAMMING.3 Press the Yes ß key. The display will show FUNCTIONNO. [ ].