Handbook | 59OverviewCustomizingFeatures andOperationsMany of your MFP’s features and functions have settings,which can be changed to customize its operation. Becauseeach country has different regulations, you may not be ableto access all of the settings listed in this chapter. If you havetrouble changing a setting, contact your dealer for assistanceor call Okidata customer service at 1-800-OKIDATA (800-654-3282).Viewing Your Current SettingsFollow these instructions to obtain a configuration reportshowing the current settings.1 Press the Select Function key.2 Press the 6/Report Print One Touch key. The displayshows 1:ACTIVITY REPORT.3 Using the numeric keypad, press 5. The display shows5:CONFIGURATION.4 Press the Yes ß key. The report begins printing.User Function SettingsUser function settings allow you to customize the generaloperation of your MFP. Refer to User Function Settings Listto determine which settings you may need to change, thenrefer to “Changing Your User Function Settings” to make thechange.Note: The Factory Default setting is in bold italics.User Function Settings List1 MCF (SINGLE-LOC.): This function automaticallyprints a Message Confirmation Report after each single-location transmission or polling transmission. Availablesettings are on and off.2 MCF (MULTI-LOC.): This function automatically printsa Message Confirmation Report after each multiple-location transmission. Available settings are on and off.3 ERR REPORT (MCF): This function automaticallyprints a Message Confirmation Report each time an erroroccurs during a transmission or polling transmissionoperation. Available settings are on and off.
