- 134 -Changing Network Settings From the Web Page5 5. Network Settings10 Click [Submit].The setting procedure for a certificate issued by acertificate authority is finished.Enabling EncryptionAfter creating a certificate, perform the followingprocedure to enable encryption.When you change the settings from the webpage to enable encryption, communication isencrypted immediately after that change hasbeen made.1 Perform “Creating a Certificate” P.133steps 1 to 3 to enter the encryptionscreen.2 Select [Enable] for the desired protocolon which encryption is applied.3 Click [Encryption Strength Settings].4 Select the encryption strength and click[OK].5 Click [Submit].Opening the Web PageMemo● Ensure to enable the protocol on which encryption isapplied in “Enabling Encryption” P.134.1 Launch a web browser.2 Enter “https://your printer’s IP address”in the URL address bar and then pressthe <Enter> key.IPP PrintingIPP printing allows you to transmit your print jobdata from your computer to the printer via theInternet. Enabling IPP PrintingIPP printing is disabled by factory default. Toperform IPP printing, enable IPP first.1 Access the printer’s web page and log inas the administrator.2 Select [Admin Setup].3 Select [Network Setup] > [IPP] >[Settings].4 Select [Enable] in [IPP].5 Click [Submit]. Setting Up Your Printer As an IPPPrinter (for Windows Only)Add the printer to your computer as an IPPprinter.1 Click [Start] and select [Devices andPrinters] > [Add a printer].2 On the [Add Printer] wizard, select[Add a network, wireless orBluetooth printer].3 In the list of available printers, select[The printer that I want isn’t listed].4 Select [Select a shared printer byname].5 Enter “http://your printer’s IP address/ipp” or “http://your printer’s IP address/ipp/lp” and then click [Next].6 Click [Have Disk].7 Insert the software DVD-ROM into thecomputer.8 Enter the following value in[Copy from], and then click [Use].- For PCL driver, “D:\Drivers\EN\PCL”.- For PS driver, “D:\Drivers\EN\PS”.- For XPS driver, “D:\Drivers\EN\XPS”.Memo● In the above examples, the DVD-ROM drive is setupas the D drive.9 Select the NFL file and click [Open].10 Click [OK].11 Select a model and click [OK].12 Click [Next].13 Click [Finish].14 Print the test page after installation iscomplete.
