- 89 -Windows Utilities4 4. Using Utility Software Windows UtilitiesThis section explains utilities you can use in Windows.Configuration ToolIn the Configuration Tool, you can managemultiple units and change settings.The Configuration Tool functions are as follows.● Display device information● Registering and managing an ICC profile● Registering and deleting form data● Managing stored jobs● Network settingsTo use the Configuration Tool in Windows 2000,you need to have the following installed.● Service Pack 4● Internet Explorer 5.5 SP1 or a higher version● KB891861 (http://support.microsoft.com/?kbid=891861)SetupPlugins can be installed if necessary.The following 2 types of plugin are available.● Network Setting Plugin● Storage Manager PluginMemo● You can install additional plugins later.Reference● For how to install Configuration Tool, please refer to“Installing Utilities” P.86.Registering the PrinterWhen using the Configuration Tool or introducinga new printer, register the printer in theConfiguration Tool.1 Select [Start], [All Programs]>[Okidata]>[Configuration Tool]>[Configuration Tool].2 Select [Register Device] from the[Tools] menu.Search results are displayed.3 Select the printer and click on[Register].4 On the confirmation screen, click on[Yes].Removing a PrinterYou can remove a registered printer.1 Right-click on the printer from[Registered device Table].2 Select [Remove device].3 On the confirmation screen, click on[Yes].Checking the Status of the PrinterYou can check the status and information of theprinter.1 Select the printer from the [RegisteredDevice Table].2 Select the [Device Info] tab.Memo● When the printer is connected to the network,[Device Status] will be displayed.● If you want to update information, click on [UpdateDevice Information].
