- 50 -Adjusting Color on the Control Panel2 2. Adjusting ColorAdjusting the Color Balance(Density)You can adjust the density of each color. You canselect a light, medium, or dark density for eachcolor.Printing Color Swatch1 Press the <Fn> key.Memo● When a printer is in the power saving mode, pressthe <POWER SAVE> button to restore from themode.2 Enter <3>, <0> and <2> using theten-key pad and press the <ENTER>button.3 Make sure that [Execute] is selectedand then press the <ENTER> button.A color swatch is printed.Memo● On the color tuning pattern, 44 squares are printed. Thepresent setting of the light, medium, and dark colors areindicated with dashed lines. You can check the color to beadjusted.Adjusting the Color1 Press the <ENTER> button.2 Press the scroll button to select[Calibration] and then press the<ENTER> button.3 Press the scroll button to select[Cyan Darkness], [MagentaDarkness], [Yellow Darkness] or[Black Darkness], and then press the<ENTER> button.4 Press the scroll button to select[Highlight], [Mid-Tone] or [Dark],and then press the <ENTER> button.5 Press the scroll button or , selectthe value you want and then press the<ENTER> button.6 Press the <ON LINE> button to exit themenu mode.
