- 142 -Other Operations5 5. Network Settings8 Click [Start] and select[Administrative Tools]>[DHCP] tolaunch the [DHCP] wizard.9 On the DHCP list, select a server to use.10 From the [Action] menu, select [NewScope].11 On the [New Scope Wizard], follow theon-screen instructions and configure thesettings as necessary.Memo● Be sure to configure the default gateway settings.● On the [Activate Scope] screen, select [Yes, Iwant to activate the scope now].12 Click [Finish].13 Select the new scope from the DHCP listand then select [Reservations].14 From the [Action] menu, select [NewReservation].15 Configure the settings.16 Click [Add].17 Click [Close].18 From the [File] menu, select [Exit].Configuring Your PrinterThe following explains how to configure yourprinter to use DHCP/BOOTP.Note that since the DHCP/BOOTP protocol isenabled by factory default, you do not have toperform this procedure.Memo● The following steps are explained using Network CardSetup as an example. The steps and menus may differdepending on the software you use.1 Turn on the printer.2 Turn on your computer and insert thesoftware DVD-ROM.3 Click [Run Setup.exe].If the [User Account Control] dialog boxappears, click [Yes].4 Read the language, and then click[Next].5 Select a model and then click [Next].6 Read the license agreement and click[I Agree].7 Read the [Environmental advice forUsers] and then click [Next].8 Select [Device Configuration]>[Network Card Setup Utility].9 Select your printer from the list.10 From the [Setting] menu, select[Setting Printer].11 Enter the IP address and then click[OK].12 Enter the password at [EnterPassword] and then click [OK].- The factory default password is the last sixdigits of the MAC address.- The password is case-sensitive.13 Click [OK] on the confirmation window.The printer restarts to enable the new settings.The printer status icon changes to red during therestart. The status icon changes to green whenthe printer has restarted and the new settingshave been enabled.14 From the [File] menu, select [Exit] toclose the Network Card Setup.