- 59 -Adjusting Color with Color Correct Utility2 2. Adjusting Color4 Click on [Next].5 Click on [Office Palette Tuning].6 Select the name of the setting you want,and then click [Print Swatches].A color swatch is printed.7 Click on [Next].8 Click on [Print Palette].The color sample for adjustment is printed.9 Compare the colors of the color paletteon the screen with those of the printedcolor sample for adjustment.Colors marked with cross cannot be adjusted.10 Click the color you want to adjust.11 Check each adjustable range from thepull-down menu for X and Y.The adjustable value varies depending on thecolor.12 Check the printed color swatch to selectthe most suitable color you want withinthe adjustable range, and then check theX and Y values.13 Select the values you checked at step12, and then click [OK].14 Click [Print Palette] and check that theadjusted color is closer to the color youwant.If you want to change the color more or changeother colors, repeat steps 10 to 14.15 Enter a name and then click [Save].16 To save the setting on the PPD fileselected at step 2, click [Save].Enter the administrator’s name and password.17 Click on [Quit].18 On the confirmation screen, click on[OK].19 Select [Print & Fax] from [SystemPreferences] to delete and reregisterall printers for which adjustments weremade.Changing Gamma Value orHueYou can adjust tone by adjusting the gammavalue and output color by adjusting the hue.For Windows1 Click [Start] and select[All Programs]> [Okidata]>[ColorCorrect Utility]> [Color CorrectUtility].2 Select [Hue & Saturation Tuning.] andthen click [Next].3 Select the printer and click [Next].4 Select the standard mode and click[Next].5 Apply settings as necessary by adjustingthe slide bar.If you select the [Use printer’s unadjustedcolor] check box, 100 percent of each color isused for printing, and the slide bar of hue is fixed.6 Click on [Print Test].7 Check the print result.If you are not satisfied with the result, repeatsteps 5 to 6.8 Click on [Next].9 Enter a name and then click [Save].A dialog box appears.10 Click on [OK].11 Click on [Finish].
