- 88 -Utilities common to Windows/Mac OS X4 4. Using Utility Software3 Click [SKIP].If you have made changes to the settings on thisscreen, click [OK].The menus available only for the administratorwill be displayed.Changing the Administrator’spasswordYou can change the printer administrator’spassword from the web page.The administrator’s password set on the webpage can be used when logging into the printerthrough the operator panel or through the webpage.Memo● The password should be 6-12 characters long, and shouldbe in one-byte (alphanumeric) characters.● The password is case sensitive.1 Launch your web browser and log in asthe administrator.2 Select [Admin Setup].3 Select [Management]> [ChangePassword].4 Enter a new password in [New AdminPassword].5 Reenter the password in [Verify AdminPassword].The entered password will not be displayed. Writedown your password and store it in a safe place.6 Click on [Submit].The network system reboots to enable the newsettings.Memo● You do not need to restart the printer. Next time whenyou log in as the administrator, use the new password.Checking Printer StatusYou can check the status of your printer fromthe web page.1 Launch your web browser and enter theprinter’s IP address.The status of the printer is displayed.Memo● When logging in as the administrator, you can also clickon [Status Window] in order to view the simplifieddisplay of the printer status.Changing Printer SettingsYou can change the main unit’s settings from theweb page.1 Launch your web browser and log in asthe administrator.2 Change the settings and click [Submit].Getting the Date and TimeAutomaticallyYou can get date and time informationautomatically from an internet time server, andreflect this on your printer.1 Launch your web browser and log in asthe administrator.2 Select [Admin Setup].3 Select [Network Setup]>[SNTP].4 Specify your time zone.5 Select [Enable] from [SNTP].6 Enter the SNTP server in [SNTP Server(Primary)].7 If required, enter another SNTP server in[SNTP Server (Secondary)].8 Click on [Submit].The network system reboots to enable the newsettings.
