- 138 -Changing Network Settings From the Web Page5 5. Network SettingsUsing SNMPv3When you use an SNMP manager that supportsSNMPv3, management of the printer canencrypted by SNMP.1 Access the printer’s web page and log inas the administrator.2 Select [Admin Setup].3 Select [Network Setup]>[SNMP]>[Setting].4 Follow the on-screen instructions tospecify detailed settings.5 Click [Submit].The network card reboots to enable the newsettings.Using IPv6Your printer supports IPv6. The printer obtainsthe IPv6 address automatically. You cannot setthe IPv6 address manually.The printer supports the following protocols.● For Printing:- LPR- IPP- RAW (Port9100)- FTP● For Configuration:- HTTP- SNMPv1/v3- TelnetOperation is confirmed under specific conditionsfor the following applications.Protocol OS Application ConditionLPD ● Windows 7● WindowsVista● Windows XPLPR(CommandPrompt)*1, 2, 3Port9100 ● Windows 7● WindowsVistaLPRng *1, 2, 3FTP ● Windows 7● WindowsVista● Windows XPFTP(CommandPrompt)*1, 2, 3● Mac OS X FTP (Terminal) *1, 2, 3HTTP ● Windows XP InternetExplorer 6.0*1, 2, 3● Mac OS X Safari (2.0-v412.2)*1, 2,3, 4Telnet ● Windows 7● WindowsVista● Windows XPTelnet(CommandPrompt)*1, 2, 3● Mac OS X Telnet(Terminal)*1, 2, 3*1) To specify a host name, edit thehost’s file or access via the DNSserver.*2) With Telnet, when only IPv6 isenabled you cannot specify a hostname by the DNS server.*3) You cannot specify a host namewhen you use a link local addressto access.*4) Enter an IPv6 address enclosedwith square brackets.Note● To use IPv6 on Windows XP, install IPv6.
