- 39 -1 1. Convenient Print FunctionsFor Windows PS Printer Driver1 Open the file you want to print.2 From the [File] menu, select [Print].3 Click [Preferences] or [Properties].4 Select the [Job Options] tab.5 Select [Encrypted Secure Print].6 Enter a password in the [Password]box and configure other options ifnecessary.Reference● For details on the options, refer to the on-screenexplanations of the driver.7 Click [OK].8 Configure other settings if necessary andthen start printing.The print job is sent to the printer, but is notprinted.9 Press the <Fn> key.Memo● When a printer is in the power saving mode, pressthe <POWER SAVE> button to restore from themode.10 Enter <0>, <0> and <1> using theten-key pad and press the <ENTER>button.11 Enter the password you set in step 6in the [Password] box and then pressthe <ENTER> button to start a jobsearching.- Press the <CLEAR> key if you enter awrong number.- Press the <CANCEL> button if you wantto stop the job search.12 Make sure that [Print] is selected andpress the <ENTER> button.If you select [Delete], you can delete the printjob, and all of the encrypted jobs with the samepassword are deleted as well.Watermark PrintingYou can print a watermark in addition to the textof the printed file.Note● This function is not available with the Mac OS X PS printerdriver.● Watermarks are not printed properly for booklet printing.For Windows PCL Printer Driver1 Open the file you want to print.2 From the [File] menu, select [Print].3 Click [Preferences] or [Properties].4 Select [Extend] tab.5 Click [Watermarks].6 Click [New].7 Specify a text, size, angle, trim andposition for the watermark and then click[OK].8 Click [OK].9 Configure other settings if necessary andthen start printing.For Windows PS Printer Driver1 Open the file you want to print.2 From the [File] menu, select [Print].3 Click [Preferences] or [Properties].4 Select [Job Options] tab.5 Click [Watermark].6 Click [New].7 Specify a text, size, angle, trim andposition for the watermark and then click[OK].8 Click [OK].
