- 36 -1 1. Convenient Print FunctionsFor Mac OS X PS Printer Driver For Mac OS X 10.5 to 10.61 Open the file you want to print.2 From the [File] menu, select [Print].3 Select [Color] from the panel menu.4 Select an appropriate value in [Tonersave].5 Configure other settings if necessary andthen start printing.Memo● If the print dialog contains only two menus and does notcontain the options you expect to see on Mac OS X 10.5or 10.6, click the button on the side of the [Printer]menu. For Mac OS X 10.3.9 to 10.4.111 Open the file you want to print.2 From the [File] menu, select [Print].3 Select [Printer Features] from thepanel menu.4 Select [Job Options] in [FeatureSets].5 Select an appropriate value in [TonerSaving].6 Configure other settings if necessary andthen start printing.Secure PrintingYou can assign a password to a print job so itcan only be printed if the password is input atthe operator panel.In order to use this function, the printer must beequipped with the optional SD memory card kit.Note● If the spooled data cannot be stored in the SD memorycard because of a memory shortage, a message indicatingthat the data is invalid appears.● This function is not available with the Windows XPSprinter driver and the Mac OS X PS printer driver.For Windows PCL Printer Driver1 Open the file you want to print.2 From the [File] menu, select [Print].3 Click [Preferences] or [Properties].4 Select the [Job Options] tab.5 Select [Secure Print] at [Job Type].6 Enter a job name in the [Job Name]box and a password in the [JobPassword] box.If you select the [Request Job Name for eachprint job] check box, a prompt for the job nameappears when you send the print job to theprinter.7 Click [OK].8 Configure other settings if necessary andthen start printing.The print job is sent to the printer, but is notprinted.9 Press the <Fn> key.Memo● When a printer is in the power saving mode, pressthe <POWER SAVE> button to restore from themode.10 Enter <0>, <0> and <2> using theten-key pad and press the <ENTER>button.
